Cleaning container 5L flat + accessories

This cleaning container made of plastic with a volume of 5 liters and equipped with a flat fitting is ideal for cleaning beer tapping equipment. In this the cleaning solution is mixed and then tapped.

This set includes the accessories to start with the cleaning.

Which tap head fits which fitting Open keg list

What are the advantages and disadvantages of the Bevi Handy beer line cleaning device?

With a cleaning container, you can quickly and easily clean the tap without a water connection nearby.
The disadvantage is, there is no mechanical cleaning by means of sponge balls but here a chemical
stand cleaning is achieved, which is also sufficient in most cases.
With the Bevi Handy chemical-mechanical cleaning can be carried out with chemicals and sponge balls.

Cleaning container features:

- ideally applicable for Desana Max or Bevi Power
- made of plastic
- bulbous
- application area not for commercial use
- application maximum 1x per week recommended
- durability 5 years
- height 39cm
- diameter 22 cm

Scope of delivery:

- Cleaning container 5 liters plastic with flat fitting
- 5x Bevi Power alkaline bags (powder form)
- Keg brush for flat tap heads straight
- Tap wrench
- 2 brushes for tap cleaning

Please note so that the color of the container is different depending on the stock level.

 
Cleaning procedure:

The cleaning container can be equipped with different fittings. This fitting can be unscrewed for filling.
If there is pressure in the container, it can be released with the drain valve on the side.

1. Fill the cleaning tank with clear cold water
2. Remove the tap head from your beer keg and place it on the cleaning container
3. Now the first thing to do is to tap off the beer still present in the line
4. Remove the tap head from the cleaning container and release the pressure over the drain valve
5. Open the container and refill it with water if necessary
6. Add a cleaning agent (liquid or powder) to the container and close it again
7. if necessary, distribute the cleaning agent by shaking and then put the dispensing head back on
8. Draw some of the cleaning solution and let it stand as per the instructions of the cleaning agent (standing time)
9. After this time, you can draw the container empty
10. Remove the tap head, open the container, rinse it out and fill it with fresh clear cold water
11. Now neutralize the beer line again, tap plenty of fresh water to remove all the cleaning agent

This is followed by the final tap and tap head cleaning:

Very important is also the cleaning of the tap and tap head.
The tap must be dismantled for cleaning with a tap wrench and disassembled into individual parts.
You can put all parts also the tap head in a container with the cleaning agent and let it act.
For cleaning, also use the brushes which we supply in the set.