Beer fittings for 9 L stainless steel cleaning container
Product information "Beer fittings for 9 L stainless steel cleaning container"
Push-in gasket with attachment for 14x8mm recess
This gasket is required if you want to mount a tap in a cooling appliance that has a
5/8" internal thread. The gasket is inserted into the rear part (threaded connection) of the tap
and then screwed into the cooling appliance.
- 7mm inside
- black
- for tap mounting on cooling appliances
- the front part of the gasket 20mm serves as a sealing surface
Login
Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Gastro Brennecke GmbH & Co. KG
Am Hafen 3
16269 Wriezen, Deutschland
Similar products
Seal for brass tap fitting
This seal fits on the rear end of the brass fitting.This is pressed outwards in the bunghole and seals in the hole.Dimensions: 17x24x7.5mm
€2.40*
Beer fittings for 9 L stainless steel cleaning container
Push-in gasket with attachment for 14x8mm recessThis gasket is required if you want to mount a tap in a cooling appliance that has a5/8" internal thread. The gasket is inserted into the rear part (threaded connection) of the tapand then screwed into the cooling appliance.- 7mm inside- black- for tap mounting on cooling appliances- the front part of the gasket 20mm serves as a sealing surface
€1.43*
Drain tap Stainless steel tap 1/2" mulled wine maker
1/2 inch stainless steel outlet tap with lock nut and sealing rings f
€26.90*
Tap expansion joint TOF self-closing 55mm spigot
1x compensator tap with foam button Beer tap with compensator and adjustment lever to adjust the flow rate.
€69.31*
Compensator tap with NC Pepsi plug-in coupling
With this compensator tap with NC Pepsi plug-in coupling k
€82.50*
Tap P3000 stainless steel compensator tap for 7 10mm pipes
Compensator tap P3000 stainless steel for 7
€92.68*
Tap compensator stainless steel CMB V10 35mm spigot
- Beer tap made of solid stainless steel - With stainless steel compensator - Thread 5/8
€98.40*
Customers also bought
Locknut 5/8"
€1.07*
Cleaning adapter 30mm no.2 with 10mm grommet
Reinigungsadapter für Schankhähne Adapter Nr.2 mit 30mm Außengewinde und 10mm Tülle Sie benötigen diesen Reinigungsadapter um Ihre Schankanlage entsprechend den Richtlinien chemisch und mechanisch zu reinigen. Dazu wird der fordere Teil des Zapfhahn mit einen Hahnschlüssel demontiert, der Reinigungsadapter montiert, Reinigungsgerät anschließen, Doppelnippel an den Schläuchen montieren, Schwammkugeln hinein und schon geht es los. Reinigungsadapter richten sich nach der SK-Nummer auf dem Zapfhahnkörper. Dieser Reinigungsadapter besitzt ein Außengewinde 30mm und 1x 10mm Tülle Für folgende SK-Nummer: Schankhahngewinde 30 mm SK 020.054 Kolbenhahn SK 020.055 Kompensatorhahn SK 083.035 (BT50) Kompensatorhahn (mit Edelstahl Kompensator) SK 196.002 Kolben-/Kompensatorhahn (vor 1999) SK 240.001 Kolben-/Kompensatorhahn SK 240.015 Kolben-/Kompensatorhahn SK 255.001 Kompensatorhahn SK
€9.30*
Customers also viewed
Seal for brass tap fitting
This seal fits on the rear end of the brass fitting.This is pressed outwards in the bunghole and seals in the hole.Dimensions: 17x24x7.5mm
€2.40*
Beer hose nozzle 10mm self-sealing for Co2 and beer stainless steel
Are you looking for a safe and hygienic solution for your dispensing system? Then our self-sealing beer hose nozzle is the perfect choice for you! Made from first-class 1.4301 stainless steel and equipped with a permanently moulded seal, this nozzle seals without additional seals. The groove-free interior and the 14 x 8 mm recess without annular gap ensure a smooth and hygienic flow of beer. The SK approval confirms compliance with hygiene standards. Order the 10 mm self-sealing beer hose nozzle for Co2 and beer hoses now and ensure the highest quality and functionality for your dispensing system.
From €1.10*
Y pieces for beer line cleaning
With the Y-piece for beer line cleaning, you can clean 3 beer lines at the same time. The 3 beer lines are connected together and you are ready to go. To connect the 3 beer lines together, you need a double nipple, which you can also purchase in our store.The Y-piece has 2 x 5/8" external threads and a 5/8" wing nut.It is also possible to use the article Y-piece 3 x 5/8" external thread with article number 0456.
€14.28*
Eurolock 50ml threadlocker
Eurolock threadlocker 50 ml - The strong solution for your metal connections!Secure your screw connections quickly and permanently with Eurolock. Ideal e.g. for pressure gauges on pressure reducers and more. Our adhesive guarantees:Fast curing for efficient workHigh strength for reliable durabilityEasy application for precise workRely on Eurolock for strong, durable connections.
€18.09*
